daryligotthisfacade

Hardie Plank Siding Advantages and Disadvantages

riley.a.speers@gmail.com (Riley Speers) — Sat, 29 Jan 2022 01:31:55 GMT

The James Hardie Corporation produces HardiePlank as a composite of cementitious materials and cellulose. The material is constructed out of three primary components: cellulose fiber, Portland cement, and sand. Trim boards, shingles, panels, and lap siding are some of the different styles of siding produced by James Hardie.

The embossed texture on Hardie plank siding is utilized to provide a convincing imitation of wood grain, as well as to visually break up the flat surfaces while also giving the boards a richer look. The Cedarmill select and Custom colonial styles of HardiePlank are built with a wood grain pattern, appearance, and feel that are comparable

The Advantages of HardiePlank siding

Excellent Resale Value for your property

If you choose HardiePlank for your home exterior, be sure to recoup a substantial portion of your investment if you sell the property. Because HardiePlank siding is rather costly and adds significant value to your property, it is regarded an expensive siding job.

Fire-resistant

In comparison to wood, HardiePlank is fire-resistant because it does not completely support combustion. This can be an excellent choice if you live in an area that may be prone to forest fires or areas that experience extreme heat.

Fiber-cement creates the appearance of wood siding

HardiePlank siding is preferred by homeowners since it has a wood look and appears natural. This is appealing to more people, and many would choose it over other exterior materials. If the neutral color of the original HardiePlank isn't to your taste, or if you want to use a specific hue on your home's exterior,

Resistance to insects and rodents.

HardiePlank is insect resistant, so it will keep your home's exterior insulated as long as you want it. The cellulose content is too small to attract insects to the material, even though there is some in it. The HardiePlank siding in Edmonton is, therefore, insect and vermin-proof for many years because of its resistance to deterioration.

Water Resistance

Fiber-cement siding material is known to be weatherproof and can withstand severe winds, such as hailstorms and floods.

Disadvantages of HardiePlank siding for your Building

HardiePlank can sometimes be expensive, depending on your needs and the location of your property, etc:

Installing HardiePlank siding is a difficult task. Only a few contractors are skilled in this area
HardiePlank has a limited supply versus a high demand for the material, resulting in an increase in price
The installation of fiber-cement siding is more time-consuming than other siding materials
Because of the extra weight of the material, shipping costs are likely to be prohibitively high
Regular maintenance is required
Painted Hardie plank boards might require regular checks for color consistency while repainting pieces where the paint has been washed or scraped by falling objects, which is probably during stormy weather

Costs of HardiePlank

This siding material, as discussed in the previous section, is rather pricey. Vinyl and brick are both a little more costly than HardierPlank siding. However, the overall cost of your HardierPlank siding will vary widely depending on climate, the number of contractors called for, and other factors.

If you're interested in siding installation or siding renovation services in Vancouver, B.C ., get in touch with Vancouver Facade today. Our team provides custom design, engineering and installation service in the Greater Vancouver Area.

How To Clean Your Aluminum Siding

riley.a.speers@gmail.com (Riley Speers) — Sat, 29 Jan 2022 01:31:52 GMT

How do You Clean Aluminum Siding?

Cleaning aluminum siding is simple, and it can be completed without the need for help. If you are unable to complete these basic procedures on your own, you may hire the services of a professional cleaning business. Aluminum siding is widely utilized in many countries across the world. It follows from this concept that aluminum siding will endure longer.

It's not difficult to keep a new appearance. You must spend money and time on it from time to time in order for it to maintain its fresh look. There are two stages involved in effective siding cleaning. In some situations, though, up to three or four additional procedures may be required. Relax; none of these actions are costly.

In this article, we've outlined and explained the four techniques for cleaning aluminum siding successfully.

Cleaning Aluminum Siding With Water

This is an easy procedure. It's comparable to running your dishwasher on the rinse cycle before reducing it to a regular cycle. This provides considerably better outcomes. When you're cleaning your aluminum siding,

When you're up, make sure the spray points down over the siding. Water will get beneath the siding if it is sprayed upwards. The drain holes are generally located on the lower part of the siding, making this feasible. This rinse is capable of taking away all of the dirt and grime from your aluminum siding. Always work

Hand washing your aluminum siding

After you've washed the aluminum siding with water, this is the step to take. You'll be able to remove all of the filth or stains that escaped during the first phase when you hand-wash your aluminum siding. Fill a pail with warm water and add an all-purpose cleaner. Scrub any remaining dirt or grime.

You'll need to divide your scrub region into three or four parts. This will aid you avoid uneven drying of the surface, which may deter you from effectively cleaning the siding. When rinsing the soap, dirt, and grime away with the garden hose, it will be quite useful. It will also assist you a lot in directing the stream of water. If stains remain after this step, you should consider going to the next one. If nothing has been lost in steps 1 through 5, then you are ready to proceed. You have completed the procedure.

Cleaning Mildew Off Your Aluminum Siding

Molds and mildew are just two of the many causes of stains on aluminum siding. To clean such a surface, you'll need a solution that can also remove mildew and mold. Make a mixture consisting of one part bleach and four parts water. Spray the remaining areas with your garden hose.

If the stain is mold or mildew, this spray will be able to get rid of it. Mildew and mold are common on aluminum siding because they thrive in more humid areas. This is a typical occurrence in more humid climates, but it's uncommon in less humid ones.

It's worth noting that the mildew or mold won't be destroyed with only the brush and soapy water. If the stain does not go away after applying these measures, you may proceed to Step 2. You are done with the process if the stain is removed at this time.

Pressure washing aluminum siding

You may only use pressure wash on established surfaces when you've already tried everything else. If you haven't gotten the results you desired in the preceding step, utilize a pressure washer to clean the aluminum siding. Depending on your budget, you can buy or rent a pressure washer. Make sure you follow the manufacturer's instructions for using a pressure washer.

The washer should be able to hold a combination of your cleaner and water. Start spraying from the top down. This final method of washing your aluminum siding should guarantee a good clean if the other methods fail!

Vancouver Facade is a premium siding contractor based in Vancouver , B.C., we offer high-end new construction siding design and installation services. If you're interested in a new custom facade for your building, get in touch with our team today!

How To Install Wood Siding Materials

riley.a.speers@gmail.com (Riley Speers) — Sat, 29 Jan 2022 01:30:49 GMT

Some people prefer wood over vinyl siding for many reasons. Wood siding, for example, can be less expensive than vinyl siding. Wood siding is another form of exterior finish that can make your property seem more appealing. It's also simple to set up. Apart from wood and vinyl siding, there are a variety of other siding choices to choose from. Aluminum, clapboard. If you wish to install wood siding on your house or commercial building, there are a few different types of wood that building professionals recommend. Unfinished red cedar and cypress are just two common examples.

The wood siding must be in the form of horizontal overlapping boards for a successful installation. They should have a width ranging from 4 to 12 inches, and the overlaps should range from ½ to 2 inches in length. There are many horizontal joints that allow you to fasten yourself to the wall frame. We serve as your favourite siding contractors in Vancouver.

Step 1 - Gather supplies, equipment, and materials for the siding installation

Before you start installing wood siding , you'll need to apply a layer of plywood sheathing to the surface. On the outside surface of the wood frame of the house, you'll also need to install felt building paper. The felt paper would serve as both a water and air barrier. It will also allow water to pass through and aid

Step 2 – Cutting Wood Siding Materials

This is best accomplished with a circular saw. It will enable you to cut the boards to the required length. The circular saw can assist you in ensuring that each connection ends on a stud. You should take measurements using a measuring square if you don't want uneven gaps between the wood boards after they're cut into their appropriate squares. If you do not. Make sure you cut slowly to avoid splintered or jagged edges. Install the siding such that the joints can align vertically in the alternating courses if possible.

Step 3 – Installing Your Wood Siding

In the third step, you must keep in mind that the siding must be put on from the bottom up. It's also important to scaffold it to complete the structure. To install the lowest siding board, adhere it to the plywood sheathing at the bottom. Ensure that it protrudes at least an inch below the foundation's wall.

Step 4 – Border and Edge Treatments

When you're finished, the lower siding board must be removed to allow it to fit against the soffit. The ripped edge of the torn piece must be covered with a frieze board. A frieze board is nailed through your wood siding and sheathing at a slant. At the point where the wall meets the rake. Take the length measurements of the bottom edge of the board to a long point. You should also take along the top edge until it reaches a short point. Before you install the wood siding, make sure the vertical corner boards are in place. When attaching the siding to the door and window, use similar caution.

It's also critical that you follow the necessary safety precautions when performing this installation. Get the safety goggles for any new materials to protect your eyes. To safeguard your feet, wear safety boots. It is also suggested that you don't do this job if you have a history of heart attacks or stroke. Wear rubber gloves when working with nails to prevent injuries.

If you're interested in getting siding installed in Vancouver for your new construction project or building renovation, get in touch with our team today!

The Pros and Cons of Composite Siding

riley.a.speers@gmail.com (Riley Speers) — Sat, 29 Jan 2022 01:30:47 GMT

Composite Siding: What It Is and Its Advantages and Disadvantages

Composite siding is composed of a variety of materials, including scraps from wood species such as pine and cedar. Despite the fact that it is susceptible to termites and rots easily, there are current makings that have changed for the better, endure longer, and aren't prone to damage from elements. Because of its outstanding reputation, composite siding is frequently used to create the outside designs of residential structures. Composite siding acts as a barrier, keeping water and fallen house particles out of the building while also protecting the inside from elements from the outside world.

Many types of hardness and softness are possible with composite sidings; as a result, when utilized in your home's exterior design, it yields ugly appearance. It may be utilized in a variety of locations, such as areas with severe rainfall, strong winds, tornados, hot or cold weather. It allows you to utilize it in any location you live or do business in.

There are several choices for the type of composite siding to utilize in your home or building design.

Fiber cement siding

The cement in the mix is high-proof, a variety of cellulose fibers, and sand. This gives it hard concrete that can endure a wide range of environmental circumstances.
It cannot be burned or infested at the same time, as it is made of wood.
Because it is heavy, attaching it becomes uncomfortable. This scares homebuyers away, forcing them to seek alternatives.
Although there's no standard form, fastening is expensive because it necessitates the purchase of cutting equipment, which might cause more harm. You'll also need to hire a professional technician to assist you with fixing the drywall.
It does not retain or reflect heat, making it unsuitable for severe weather conditions like cold and extreme heat.
It is time-consuming and costly to maintain.

Oriented strand board (OSB)

It's composed of sawdust soaked in a bonding agent to make it more stable
It's more similar to wood but less expensive.
It is fragile and can be quickly broken down by water, which means it rapidly deteriorates (not very good for the Vancouver climate!)
It swells and fades away quickly.

Everlast composite siding

It is a hybrid product that combines the best features of OSB and fiber cement siding. However, it lacks certain characteristics of both materials.
It looks like wood and has an earthy orientation.
It's made of a material that is not wood, so it won't rot or be eaten by insects.
It doesn't need to be painted, since it comes in a variety of hues.
It's built of thick planks that interlock and is easy to install, so it doesn't break.
It combines the advantages of OSB and fiber cement to make it more beautiful, giving you the most-desired outside perspective.

Pros Of Composite Siding

It's exquisite; its design is distinctive and attractive, especially given the intricate interlocking joints that reveal it in a way you can't see the nails. The many 15 hues it comes in are also part of its beauty.
It's quicker to install because their boards are reduced to size using standard wood cutting tools rather than diamond- Blade cut fiber cement has to be sliced with special equipment.
It features patented interlocking joints that guarantee the boards are in line and safe to allow expansion and contraction when temperatures vary throughout the year. It also ensures that there is no vacant area between the planks.
The next question is whether or not the wood has to be sanded often. The answer is no, since it does not need to be painted because it is resistant to mold, mildew, and pests that can make it filthy. It also helps it endure harsh weather conditions, making it damage resilient.
The most energy-efficient siding on the market is composite; its construction reflects back outside energy, making air conditioning and other equipment like it run smoothly. The white covering also aids in heat dissipation during the hot months, providing insulation up to 70%.

If you're interested in composite siding installation in Vancouver , get in touch with our customer service team to book a consultation for your next project.

The Dangers of Asbestos Siding

riley.a.speers@gmail.com (Riley Speers) — Fri, 28 Jan 2022 22:53:07 GMT

Asbestos siding is composed of asbestos fibers mixed with Portland cement. Because of its durability and fire-resistant nature, the material was highly valued as a home exterior for many years. When subjected to pressure, it is very fragile and readily cracks and breaks, such as when nailed. Siding that has cracked or broken can create a breathable powder that can result in lung issues if inhaled.

However, asbestos is toxic, and it causes lung cancer and a variety of other serious respiratory illnesses. However, just having asbestos siding on your house does not imply that you will develop cancer from it. Loose airborne asbestos fibers, on the other hand, are dangerous and cause far more lung diseases than tightly bound or enclosed asbestos.

The following solutions may reduce any potential health hazards from asbestos inhalation:

Don't Disturb Your Asbestos Shingles

There is no airborne asbestos when you leave the shingles on your walls, so there isn't much of a health risk. While working on the siding, avoid scrubbing, brushing, or drilling since this may cause asbestos particles to fall off the wall. Also, while handling it, keep in mind that you'll need to use a respirator whenever you plan to agitate any building material containing asbestos.

Repainting Your Asbestos Siding

In this process, you should use a wet cloth to wipe away the layers of paint that have accumulated on your siding. While working on asbestos siding, gently brush off the old, flaking paint while keeping the siding wet to avoid dust. To prevent flakes of paint from landing on your property, wear a HEPA-rated respirator and other safety equipment to minimize exposure.

Repainting your asbestos siding can be an alternative to replacing it, but it's only a short-term solution. Replacing your siding completely will be a better long-term solution.

Using New Siding To Cover Asbestos Siding

Another alternative that may look appealing is to nail or screw new siding material over the top of your old siding, but this is not a particularly safe process. Asbestos shingles are quite sturdy yet brittle. It's tough to drive screws and nails through them without drilling. As a result, dust would be created, and asbestos dust is highly dangerous.

Conclusion:

The dangers of being exposed to asbestos are so great that workers must wear a respirator and disposable overalls. In order to be safe, you'll need to wear a respirator and a completely sealed set of disposable overalls. Sheathing or foam insulation may be applied over the asbestos before covering it with vinyl siding, but this is not always the best solution long-term.

If you're interested in removing asbestos siding, make sure to check your local building codes and rules first. It is suggested that you hire a certified asbestos removal business to assist you in taking off the asbestos siding in Vancouver . To remove and dispose of the material safely, follow your local municipal regulations.

Natural Stone Siding vs Stone Veneer Siding: Advantages and Disadvantages

Fri, 28 Jan 2022 22:53:05 GMT

Both interior and external walls of a home may be covered with protective or ornamental coverings known as stone siding and stone veneer siding. Other siding choices, such as bricks and plastic sidings manufactured from PVC resin, offer a more natural appearance than natural stone sidings.

To begin with, real stone, flagstone slabs, or cut from quarried stone or fieldstone were used to create Stone siding. However, due to the high costs involved in mining, cutting, transporting, and employing a mason to install genuine stone siding is very costly, thus stone veneers made from other products are much more common in 2022!

The most long-lasting buildings in history are stone houses. They are also more appealing when integrated with the environment, such as constructing on a hillside, near a forest, or closer to a moving stream. As a result, stone siding has an appeal that distinguishes it from other building materials and makes it one of the most valued building materials ever constructed.

Authentic Stone Siding

Advantages

The genuine stone siding stands the test of time. They are sturdy and will give your home a timeless appeal. Stone is the most plentiful substance on earth, making real stone siding a more natural and eco-friendly construction material. It's also an environmentally responsible solution to use on your property exterior. If a house is destroyed or demolished, the stone will end up being recycled in some form.

Disadvantages

Real stone siding is more expensive than stone veneer constructed of other materials such as plastic. Real stone siding mining may cause irreversible environmental damage, including harm to animals and future generations. They can develop cracks. These fractures might be difficult to repair, resulting in dampness seeping into your home. These leaks might also destroy the stone s

Stone Veneer

Advantages

When properly installed, they are less expensive and last for many years. It gives the appearance of natural beauty to any home exterior. They are more suited for non-loadbearing walls that do not require additional support. Because they are lightweight and come in bigger panels, they're easier to install in a shorter period of time. They only need modest care.

They may be reused, just like real stone siding. They come in a variety of colors and styles, such as fieldstone, ledgestone, stack stone, cut stone, river stone, limestone, castle stone, and so on. They are ideal for a wide range of surfaces since they can be applied to any material including natural stones.

Disadvantages

Siding may allow moisture to seep through the gaps, causing mold problems. Some types may not be appropriate for swimming pools, showers, or applications that are in continual touch with water and moisture. The product is not sustainable since it is produced from non-renewable resources. Installation mistakes might result in breaking and chipping.

Cleaners that are too harsh may damage the surface and wear down the tint. Mortar can fissure during earthquakes or from traffic vibrations from close heavy traffic. Moisture can also enter cracks in the mortar and end up cracking during freezing in colder climates.

The durability and low maintenance of stone veneers are remarkable. The quality of installation, on the other hand, has a significant impact on their performance and longevity. You should ensure that your project's surface area is prepared correctly, as this will help you achieve your goals.

CanExel Installation Guide

Mon, 11 Oct 2021 23:37:52 GMT

The CanExel products at a glance

These installation instructions are in accordance with the standards of the National Building Code of Canada, section 9.27, and are intended to cover the normal building practices encountered in Canada and the United States.

Installation guide:

Stud spacing

1. Can be installed over both sheathed and unsheathed walls.

2. Must be nailed into studs spaced not more than 16 inches.

3. Siding should not come in direct contact with concrete and must maintain a minimum gap of eight inches between the bottom edge of the siding and the ground.

4. Siding may be applied over masonry constructions as long as furring strips are utilized and securely attached to masonry assembly on 16-inch centers.

Moisture

1. Check local building codes for moisture handling application procedures.

2. Gutters are recommended for controlled roof water runoff.

3. Basement and crawl spaces should be sealed with a layer of polythene, asphalt, or polythene to minimize the risk of moisture damage.

4. Siding must not be applied to green or crooked structural framing members.

5. Do not apply siding over rains-soaked or buckled sheathed materials.

6. A vapor barrier with less than 1 perm rating must be installed on the warm side or the interior surface of the wall. It should be further extended behind partition walls to form continuous protection of exterior walls.

7. Consult local building code for a secondary weather-resistant barrier.

Flashing windows and door openings

1. All openings must be properly sealed/flashed to prevent moisture buildup.

2. Siding applied adjacent to walks, porches, patios, must have a 2” clearance above any surface.

3. Forcing or springing siding into place will cause buckling.

4. Leave a 3/16-inch gap whenever siding butts against anything.

Kick-out flashing

1. Install step flashing with a minimum 4-inch upper leg.

2. Do not extend the siding or trim into the kick-out flashing gutter.

3. Maintain clearance between gutter end and adjoining walls.

Insulated sheathing

1. Whether it’s low-compression rigid foam or fiberglass, adequate bracing of the wall is in accordance with the National Building Code.

2. Siding can be nailed directly on rigid foam sheathing up to 1” thick unless the local building code demands a drainage plane. Nail length must be increased to ensure a minimum 1-1/4“ fastener penetration into structural framing.

3. In the case of fiberglass or rigid foam sheathing more than 1” , a minimum of 1-1/4“ thick by 4” wide strapping must be installed over the sheathing. The strapping must be securely fastened to structural framing spaced no greater than 16” OC . The minimum nail penetration should be 1-1/4 inches and the maximum nail spacing should not exceed the width of the siding.

If you're interested in getting premium facade design and installation for your siding project, get in touch with Vancouver Facade today.

How To Install Vinyl Siding

riley.a.speers@gmail.com (Riley Speers) — Thu, 09 Sep 2021 21:55:57 GMT

How to install vinyl siding on a house

Vinyl siding remains one of the most popular options in the market for homeowners. Despite its low cost, it comes in all sorts of colors, textures, and variations and requires the least amount of maintenance. It doesn’t have the drawbacks of wood and metal siding and can be installed with ease. Let’s figure out how you can install vinyl siding on your home:

1. Remove Old Siding

Take a zip tool and start at a loose spot or at the end of the siding to insert the tool. Be careful with this job if the siding is old. You don’t want vinyl splinters in your body. Carefully slide the zip tool under the lower part of the siding and hook the locking edge. Now pull down and slide it horizontally to unlock the siding. As you remove siding pieces, draw a line before removing the nails with a pry bar. This can act as a reference for installing new siding. When you remove old siding you should also consider replacing the insulation material. If you have wood siding, you may as well install new vinyl siding over it instead of replacing it.

2. Prepare the outside of your home

Vinyl siding can create some structural defects and hide moisture problems. That’s why you need to get rid of those issues before you can proceed with the installation. Check the boards and tighten them if necessary. If a board is rotting, replace it with a new one. If there is caulking around your old windows and doors, now is the time to scrape them away. It’s also important to clear the working area so that you can get unobstructed space for installing the siding. Remove light fixtures, mailboxes, down-spouts, and other such obstructions. Use a rope to tie back plants and shrubs that may be affecting your work area.

3. Apply a house wrap

You need to install house wrap or replace the old one. It acts as an excellent water barrier that sits behind the siding and prevents water from damaging the boards and leaking into your home. If there are vertical seams in the house wrap you need to caulk those areas. later in the installation process, you need to caulk between the windows and house wrap and behind the J-channel for moisture sealing.

4. Create outlines

Once you’re done applying the house wrap and caulking the necessary areas, it’s time to create outlines for your siding project. Get a chalk and slowly create outlines around your home with as much precision as possible. These lines will act as a guide for installing the new siding.

5. install the starter strip

With the chalk line as your guide, place the vinyl starter strip even with the top of the line. When you install the starter strip it’s important to consider how the corner posts would fit in and leave a bit of room for that. Begin with a wide starter strip and install it an inch below the top extreme of the foundation. Wide starter strips are preferred in this position since they protect key areas of your home from snow and rain and prevent structural damage. While installing the starter strip don’t nail it too tight. Leave a small gap of a quarter inch so that the strip can expand during the hot seasons.

6. place the corner pieces

Once the starter strip is installed, it’s time to add the corner pieces. Install inside corner pieces positioned around ¾ inch under the starter strip. Leave some room below the underside if you’re using a vinyl soffit. Proceed to install inside corner pieces on the adjoining walls and nail them at the top. The subsequent nails should go around 8 to 12 inches below that. Remember not to nail the strips too tight for the same reason mentioned above.

Once you’re done with the inside corner pieces, it’s time for the outside corner pieces. While installing outside corner post pieces, allow a gap of a quarter inch at the top where the corner pieces meet with the eaves. Keep in mind that the post needs to extend past the bottom of the starter strip by around ¾ inches. Nail positioning for the outside corner pieces is similar to the execution for inside corner pieces. Don’t nail things too tight and splice where needed. Finally to cap the outside corner posts, use flaps of 2.5 inches and bend them to terminate and close the post.

7. put siding trim around doors and windows

Install the casing and nail it loosely to the wall. Add side and bottom J channels and line them flush. Cut a tab in the bottom of the side J channels and fold it. Then cut the drain tab and bend it. Once the side J channels are done, install the bottom J channel so that it extends beyond the side casing about the width of the J-channel’s face.

8. install siding panels

Your vinyl siding panel should easily snap into the starter strip. When it’s done, nail them to the wall. Leave a bit of space where panels meet the corners. For overlapping panels, you get 1-¼ inch pre-notched cutouts. Leave the final nail for each panel around 10 inches from the end for ease of overlapping.

9. proceed upward

With the step mentioned above, keep installing the siding panels and make your way up around the doors and windows. When you reach the eaves, get the under-sill trim and nail it to the sidewall. Cut the top siding panel to length from the lock of the panel to the top of the under-sill trim. Finally, use a snap-lock punch to snap the top panel in place.

If you follow the above-mentioned steps, you would be able to install vinyl siding on your home with ease. However, it’s a challenge for beginners who haven’t been involved in any major home improvement project. That’s why it’s best to call a professional so that you can get your siding installed properly. Get in touch with our team today if you're looking to install new siding on your home.

What is Cladding?

riley.a.speers@gmail.com (Riley Speers) — Sat, 21 Aug 2021 22:50:35 GMT

What is Cladding?

So, what actually is cladding? Cladding, by definition, is a layer of material that's placed on a built structure (building or house) or on any surface.

Cladding is what you see when looking at a building from the outside. Cladding forms part of the architecture of a building not only in terms of aesthetics, but also structure because cladding doesn't support any of the load boarding of a structure.

Cladding protects a building or structure from the elements by shielding a building envelope from rain, snow, sleet, wind and the sun's rays.

What types of cladding should I use for my facade or exterior?

Many people have a difficult time choosing their preferred choice of material or style of facade because it's such a niche product and only an expert opinion will often make the best choice.

Some of the most common types of cladding used on commercial and residential buildings include:

Natural Stone Siding

This is often composed of either a geometric or worked stone blocks - these can provide your building architecture with a more rustic and natural exterior design. This siding style is often best for a rustic, Latin or country-style facade.

Quarry Stone Siding

This type of siding is composed of natural stone. This type of siding is often used to design and construct unique stone columns.

Tile Siding

Though these types of siding are not as common due to their fragility, porcelain and ceramic tiles are sometimes used to create some modern facade designs. These materials are sometimes used to create contemporary and colonial facade designs. Tile, talaveras and losetas have been a very important part of Mexican facade architecture.

Steel Siding

Often referred to as "steel cladding", this siding material is becoming more popular due to the boom is industrial facade designs. Steel siding can come in a matte or a chrome finish, providing whatever look an architect or designer is looking for.

Steel siding can also come in many various colors such as: Red, Black or Yellow. These more pronounced color choices are often paired to contract other building features such as windows and other siding materials such as stone and other smooth cladding types.

Microment Siding

Microment (polished cement) is a type of siding material than can take any form due to it's unique structural properties. Microment is a type of polished concrete that dries very quickly, allowing you the ability to create custom facade designs. Microment is often used in contemporary and urban design due it's relatable look and feel to these design looks.

M icroment is a popular choice for residential or commercial properties and is often placed in toilets, bathrooms, kitchens and other environments that involve heavy-duty usage such as: offices, hotels and other hospitality venues. Microment is great for nearly every property type due to it's resistance to the growth and accumulation of fungi's, limescale and/ or various types of molds.

Brick Siding

Although this type of siding was often used just for structural purposes, brick siding is now becoming more and more popular as designers and architects are seeking a more rustic look. Many different types of bricks can be used and some designers opt to even use fake brick cladding on top of a wall envelope to achieve a rustic look while saving money on materials and labor.

Wood Siding

Wood facades are also becoming more popular as a rustic facade style is becoming more in-style. Wood facades can stand out amongst other designs and are often incorporated with other design styles to help accentuate building features such as: doors, balconies and lattices.

Wood cladding can come in many various forms and is usually avoided due to the extremely high costs but can provide a premium-rustic style for your home or commercial building.

Clay Brick Siding

This is one of the most commonly used types of siding materials. This type of cladding helps to reinforce and accentuate the industrial and rustic facade styles and is ideal for interior decoration in lofts and apartments to add a youthful, industrial chic touch.

If you're looking at building your next project and need a professional facade design and installation company, get in touch with Vancouver Facade for all your siding needs. Our team has in-house designers and engineers to ensure your next construction project is executed to perfection.

If you're interested in premium facade design and installation for your new construction project, get in touch with Vancouver Facade today.

What is Live Edge Siding?

riley.a.speers@gmail.com (Riley Speers) — Sat, 21 Aug 2021 20:35:27 GMT

What is live edge siding?

Live edge siding is essentially wooden boards that have not been cut on one side, creating a "natural" look on the side of your building or house. The natural curves of the tree are left to be exposed for all to see and is becoming more and more common as consumers are going for more holistic and natural products for their siding needs. Live edge siding is quite often made of cedar, but can also be made of other types of wood.

Where can I buy live edge siding?

Live edge siding can typically only be purchased directly from the business who milled the boards or from specialty suppliers (meaning you must go through a professional siding company to acquire them). Live edge siding is difficult to acquire mainly because of the price and uniqueness of the product. This siding product usually must be custom ordered so it's important to plan your acquisition of this product far in advance for your construction project!

How much does live edge siding cost?

Live edge siding can cost anywhere from $2.45 - $4 per square foot. The cost for this product is so high because of the craftsmanship and rarity of live edge siding. The typical house can cost upwards of $18,000 to outfit with live edge siding. It's best to get in touch with an expert siding company to inquire about installing this high-quality product.

How to install live edge siding?

Live edge siding can be installed very similarly to how clapboard siding is installed, the process is nearly identical, plus the need to be careful because of the untamed edges.

Horizontal Live Edge Installation

It's always important to begin from the bottom and work your way up when installing horizontal siding. It's critical that the bottom board is level before continuing to the above sections. Every few courses, you should measure from the last course to the top of the wall to ensure you're building evenly.

Ensure all trim boards and corner boards should be installed prior to installing your siding.

Due to the difficulty and high-cost of this type of siding product, it's often best to get in touch with a professional before proceeding with acquiring and installing any type of high-end siding product. Get in touch with Vancouver Facade if you need siding installed in the Greater Vancouver Area.

How Siding Installation is Done in Vancouver

Sun, 25 Jul 2021 03:57:12 GMT

What Happens When You Need Siding Installation in Vancouver

Siding allows you to improve the look of your home and provides an added layer of protection. However, it will only be effective if it’s installed properly. Since it’s a tricky project, it’s best to hire a professional siding contractor to get the job done. Here’s what happens when you want to get siding installation in Vancouver:

1. Preparing Your Home

Preparing your property is key before the siding contractor company comes for the installation. You need to trim down trees and shrubs around your home and mow the grass so that the installation crew has an unrestricted view of the property and can easily find small hardware that may slip out of the hand during the installation.

It’s also a good idea to remove shelves, frames, and any other heavy furniture or accessories from the interior walls. Siding installation may cause a bit of shaking and you don’t want the precious family photos to break or the furniture to fall! Clearing the driveway is another good measure to allow the crew easy access and also protect your vehicles from flying debris.

2. Removal of Old Siding

A good siding contractor will have a plan to remove the old siding on your property. They also have measures to get rid of the old siding. A professional contractor removes the old siding and piles them up in your yard until they get hauled off by a dump truck. If the old siding happens to be made out of any form of metal cladding (aluminum, steel, etc) then the old material will be recycled.

3. Wall Inspection and Preparation

Siding can’t be installed on damaged walls. So, your contractor will assess the walls and repair them if needed. Without smooth and level walls, the new siding won’t look good and would be prone to damage. Apart from that if the sheathing under your old siding is damaged, it would also be replaced. If your property is very old and the contractor finds asbestos during the inspection, it’s best to get it removed since that’s a highly toxic material.

4. Insulation

Siding installation in Vancouver and everywhere else comes with insulation. So when the old siding is removed, you lose the insulation material as well. A professional and reputable contractor always plans for that and will install new insulation material along with the new siding so that your home remains energy efficient and comfortable.

5. Installing new siding

Once all the above steps are done, your new siding is ready to be installed. If you opted for fiber cement siding instead of vinyl or wood, the length of your siding project will be stretched. Fiber cement is tougher and hence requires tougher tools and time-consuming precision to cut and finish to the required dimensions. After the installation, the siding contractor would clean your property and wash the new siding boards to get rid of the dust and debris.

Siding installation in Vancouver can be a breeze if you choose the right contractor and the right material. Fortunately, Vancouver Facade has you covered with years of experience and great customer experience. They can even help you choose the right materials for your property.

Why You Should Hire a Siding Contractor in Vancouver

Sun, 25 Jul 2021 03:42:26 GMT

Why You should hire a siding contractor in vancouver

Siding is a big part of any home improvement project since it protects your home from dust, rain, and other elements of nature. Apart from that, it also gives your home a unique look and makes it stand apart from the rest of the properties in the neighborhood. Instead of DIYing the project, hiring a professional siding contractor in Vancouver is a much better alternative. Here’s why:

1. You Can Save Time

Siding projects are complicated and can take as many as several weeks. If there’s bad weather, the timeline is further stretched out. So, if you do the project yourself, you need to sacrifice many weekends, time from your job, and precious family time. Since you aren’t a professional you will learn things as you go, which adds more time to project completion - you may be looking at months instead of weeks.

On the other hand, if you outsour ce the project to a siding contractor, you can continue your life as you were. No need to take time off of work or postpone barbecues with your friends or take time off from the family. You can even go on vacations and return to a home that has brand new siding installed on all sides!

2. Professional Expertise

As mentioned above, you aren’t a professional when it comes to siding installation. While researching about the materials and sourcing them is an easy task, installation is a beast of a task. You need certain skills, experience, and expertise to install siding and without it, you may be stuck on the project for months. While the task looks simple, getting around corners and trimming around the doors for a refined finish is very complex. Moreover, siding contractors with years of experience under their belt would also be able to recommend the perfect siding material for you and source it from trusted vendors.

3. Building Permits

You may live in an area where you need certain permits before you can start siding installation. That’s a big hassle and going over the bureaucratic hurdles can be very annoying. It’s inefficient and that translates into a lot of wasted time. When you hire a siding contractor in Vancouver, that’s one less factor to worry about. From their accumulated experience, siding contractors are aware of all the necessary codes and getting the appropriate building permits is just another day at the job.

4. Warranty

If you do install siding on your own and something goes wrong, you don’t have any warranty to recoup the loss in damages. Moreover, fixing the problem takes more time and more money. However, most reputed siding contractors would provide you warranty and help you fix any problems that pop up. Many insurance companies may require a licensed siding installer to install your new siding to be eligible for an insurance claim, too!

As you can see, there are numerous advantages of hiring a professional siding contractor in Vancouver. If you are worried about the quality of the work, then you should contact Vancouver Facade , we're highly reputable professionals who will get the job done in the least amount of time, a within your budget.

Types of Cedar Siding

Wed, 21 Jul 2021 22:34:25 GMT

Types of Cedar Siding used in Siding Projects

Drop Channel Siding

A versatile style of cedar coding that can be installed vertically, horizontally, or even diagonally. If you have a cabin-style home in the woods, this kind of coding is great since it can easily accommodate the difficult angles during installation and stay consistent with the external décor. This type of siding uses an overlapping edge that allows the wood to expand and contract along with the temperature changes. New Paragraph

Lap Siding

Lap siding is one of the most common types of siding. Here boards are sawed lengthwise and installed with slight overlap on each other. Since this kind of structure doesn’t allow any edges, it doesn’t hold or absorb any moisture and drains water pretty well. When you get lap siding for your property, make sure that there is as much overlap as possible between the boards. With more overlapping, you get more sturdiness from the structure. New Paragraph

Split Log

Log cabins have been a fond childhood memory due to movies, pop culture and beautiful vacation retreats spread across the world. If you have dreamt of having that kind of look for your home then you can go with this option. However, this type of siding is weak to moisture and hence needs a protective sealant coat.

Tongue and Groove

Like drop channel siding this one also provides you with the versatility to install the boards in any direction.

Shake Siding

They may look like shingles, but are much more durable and thicker. They are small in size and usually available in numerous fixed sixes. When installed they start from the bottom attached to the sharing. The rest of the boards are overlapped on each other and creates an amazing carefree and rustic look. However, you also need to coat them with a fire retardant sealant for your safety. You need to check if these sidings are permitted in your area since areas that may have frequent fires may have regulations against them.

Shingle Siding

If rustic isn't your thing and maybe you want a more modern look, then you need this siding for your home. Moreover, they can be easily installed on weirdly shaped walls. You can even stain them or paint them according to your needs. The best thing is since they are made of cedar they are very low maintenance.

Why A New Facade Is Important For Your Building

riley.a.speers@gmail.com (Riley Speers) — Fri, 30 Apr 2021 02:23:40 GMT

1. Optics to your residents

A new facade can no doubtedly renew life in to your building, it also builds a newfound respect for any residents who rent a commercial space or residents who rent a residential space inside your building. A tenant who respects the environment they live in will take much better care of your space, which reduces maintenance costs in the long run.

2. new found life to potential buyers

A new facade for your building can greatly increase the potential selling value to a prospective buyer. An older building with an outdated exterior - whether commercial or residential - can reduce potential selling value just due to being an eye sore. A new facade is one of the most simplistic ways to increase property value (especially on a commercial property).

3. better for property health

A new exterior can increase the health of your property because of the upgraded materials. Newer facade materials are often made to a higher quality and can protect the internals of the building much more than older and dated materials.

Ensure you update your building with newer building materials with premium facade materials!

If you're interested in custom facade design and installation for your new construction project in Vancouver, get in touch with Vancouver Facade today!